TrolMaster Hydro-X Controller w/ 3-in-1 Sensor (Temp/Humidity/Light) TrolMaster

Unleash the full potential of your grow room with the TrolMaster Hydro-X system! This professional-grade, fully customizable, and modular designed single zone controller is the ultimate solution for automating your grow room. With its user-friendly design, setting up and installing the TrolMaster Hydro-X system is a breeze.

Compatible with just about every major grow light, HVAC system, dehumidifier/humidifier, and even CO2 systems, you can achieve complete control of your grow room from anywhere with the free TrolMaster app. Say goodbye to being tethered to your grow room and hello to more time doing what you love!

Includes:

• 1 x Hydro-X Environment Controller
• 1 x 3-in-1 Sensor for Temperature / Humidity / Light 
• 1 x RJ12 Cable Set for Light Connection
• 1 x Male-to-Male 16ft RJ12 Cable 
• 1 x Male-to-Male 4ft RJ12 Cable
• 1 x RJ12 T-Splitter

Click here to build your own complete TrolMaster system on one page.

Complete Grow Room Control

The TrolMaster Hydro-X Environment Controller With 3-in-1 Sensor is your ultimate solution for a perfectly controlled and optimized grow room. With the Hydro-X, you have the power to effortlessly connect and control everything in your grow room with just one piece of equipment.

Featuring 17 different control modules which allow you to control virtually any lighting fixtures, humidity devices, temperature devices, CO2 devices, and pre-programmed devices. 

And the best part? Installation is a breeze! The Hydro-X eliminates interference in the growing environment with its hard-wired sensors and control modules using standard RJ12 cable and splitters, making it as easy as plug-and-play. Say goodbye to a complicated setup and hello to a joyful, effortless grow room experience.

Control On-The-Go 

Say goodbye to feeling tethered to your grow room and hello to complete peace of mind with the TrolMaster Hydro-X Environment Controller With a 3-in-1 Sensor. This innovative device allows you to connect to the Amazon cloud service, giving you the freedom to monitor and control your grow room atmosphere from anywhere, at any time.

With the free TrolMaster smartphone app, you can check in on your plants, receive push notifications and even read historical data with a graph. Plus, if something goes awry, the Hydro-X will send you a warning message so you can take action right away. And, if the internet is ever unavailable, the micro-SD port allows you to log data for later review.

But that’s not all – the Hydro-X also features an LCD display that provides you with current conditions and easy access to all settings. With just six buttons on the front of the unit, programming is a breeze. So whether you’re on vacation or just want to relax at home, you can trust the Hydro-X to keep your grow room in tip-top shape and keep you informed every step of the way.

Lighting

When paired with one of Trolmaster’s LMA series of lighting adapters, this powerful device will bring your gardening dreams to life. With the ability to control almost all LED or HID horticultural lighting systems, you’ll have complete control over your plants’ growth and development.

But that’s not all – the Hydro-X can connect up to 512 grow lights and features two separate lighting control channels, allowing you to easily manage two different lighting systems at the same time. Imagine being able to set custom setpoints for each system, ensuring that your plants receive the perfect amount of light and nutrients to thrive.

Which Lighting Adaptor Do I Need?

• LMA-11 | Lighting Adapter P | For Phantom 
• LMA-12 | Lighting Adapter D | Dimlux
• LMA-13 | Lighting Adapter S | Sun System
• LMA-14 | Lighting Adapter F | HIDs Luxx/Nanolux/Gavita/Grower’s Choice
• LMA-14 | Lighting Adapter F | LEDs HLG/Fluence/Spectrum King
• LMA-14 | Lighting Adapter F | LEDs with 0-10v dimming protocol
• LMA-15 | Lighting Adapter DLI | DLI Ballasts
• LMA-T | Lighting Adapter T | ThinkGrow LEDs

NOTE: Each LMA-14 can control up to 40 HID lights or 24 LEDs. Additional LMA-14 adapters can be used with the SPH-1 to control as many lights as required.

If you need to run more than 24 LEDs with the LMA-14, you will need an SPH-1 Splitter Hub. With its eight open RJ12 ports, you’ll never have to worry about running out of room. Each port can accommodate up to 24 lights, meaning you can truly let your imagination run wild with vibrant, captivating designs. And the best part? You’ll still only need one LMA-14 for each port – so you’ll be able to keep your setup as streamlined and efficient as possible.

*When using with Fluence Spyder 2x/2i fixtures @ 277v, no more than 12 LEDs per LMA-14

What Can I Control with the TrolMaster Hydro-X Controller

Temperature Control

• HVAC Systems: 
• TS-1 (4 Wire) thermostat station is designed to replace a thermostat connected to a cool-only HVAC unit
• TS-2 (6 Wire) thermostat station is designed to replace a thermostat connected to a cool-only HVAC unit

• Mini Split Systems:
• ARS-1 works with most mini-split AC units and some window AC units that came with an IR remote

• Temperature-Controlled Outlets 120V Devices
• DST-1 Any heating or cooling device that is 10-amps or less

• Temperature-Controlled Outlets 240V Devices
• DST-2 Any heating or cooling device that is 10-amps or less

• My temperature device (heating/cooling device) is over 10-amps; now what?
• Use of the 4RS-1 in addition to a DST-1 will allow you to accommodate up to a 25-amp unit or 50-amps across the four receptacles. 

Humidity Control

• Commercial Dehumidifiers
• HS-1 Humidistat Station works exactly like an external humidistat, eliminating the surge usually associated with dehumidifiers

• Humidity-Controlled Outlets
• DSH-1 (120V) / DSH-2 (240V) allow you to connect standard humidifier (up to 10amps) or dehumidifier units (up to 7 amps)

• CO2 Controlled Outlets 120V Devices
• DSC-1 controls any supplementary CO2 devices or CO2 exhaust controls

• Timer Controlled Outlets 120V Devices
• DSP-1 controls any 120V/10A device with this versatile and easy-to-use timer module

• Dry Contact Station (Light Dep Curtains / Pump Contactors / Temp / Humidity / CO2 / Lighting Contactors)
• DSD-1 is a solution for those devices that would normally be connected via a “dry-contact” or relay to activate the device

Additional Controls

• See more sensors and device stations, such as smoke detectors, water detectors, etc., here, and if you want to hear it explained further, check out the video below!

Specifications:

• Input Voltage: 100-240VAC, 50/60Hz
• Certifications: ETL/FCC
• 3-in-1 (Temp/Humid/CO2) Sensor: Max 1pc per set
• CO2 Sensor: Max 1pc per set
• Smoke Detectors: Max 5pcs per set
• Water Detectors: Max 5pcs per set
• Temp Device Stations: Max 4pcs per set
• Humid Device Stations: Max 2pcs per set
• CO2 Device Stations: Max 2pcs per set
• Program Device Stations: Max 9pcs per set